My salt system does not produce chlorine

 In most cases, the system works very well, but the interpretation is wrong. The salt system is a chlorine gas generator that provides chlorine to the pool in the sequence set by the % production dial. A system set at 50% does not always produce at 50% capacity, but at 100% capacity for 50% of the time. Therefore, it will not be uncommon to see zero data in the diagnostic. Chlorine testing should be done in the morning, not at the end of the day. If you want to verify that your system is working properly, here are some simple steps to follow. First, you will need to turn the system off and then back on again. Wait about 15 seconds and press the diagnostic button 4 times to see if there is any amperage. If there is, your salt system is producing chlorine. It is very important to ensure that you have the proper salt level for your type of system.